This file lists the coordinates of the waypoints in the path between stops of each route, from start to end. These points will be used as the input to generate the turn by turn directions for the routes.
Fields
route_id
The id of the route the point belongs to.
sequence
A number that gives the order of the point in the path for that route. For example, a value of 7 means that the point is the seventh step in the path for its route.
latitude
The latitude of the point.
longitude
The longitude of the point.
time
The time at which the bus is supposed to reach the waypoint. The times need to be consistent with the stop times. For example, if a waypoint must be located in the way between stops 2 and 3 of the route, then the waypoint time needs to be after the time for stop 2 and before the time for stop 3.
Example CSV
In this example, the school system has five routes, r1 through r5. For simplicity, only the first and last few lines are shown.
- route_id,sequence,latitude,longitude,time
- r1,1,-92.35552,34.51234,10:35:41
- r1,2,-92.35437,34.51336,10:35:45
- r1,3,-92.35416,34.51379,10:35:50
- …
- r5,1,-91.85478,36.12938,18:07:00
- r5,2,-91.85632,36.13017,18:07:04