Bus History Timeline

Bus History Timeline

With the bus history timeline, you can review bus GPS location, video, incidents, route status, and student load count all in one tool. Here's how to use it:
1. Open the Buses page, found in the Fleet Management section of the dashboard.
2. Select the desired bus by clicking the checkbox to the left of the Name column.
3. Click “Click to enlarge map” in the panel on the right.
4. Click “History” in the top right corner of the page.
5. Click on the “i” icon in the bottom left corner...
...to reveal the legend for the timeline:
  1. GPS: Bus had a GPS fix
  2. Video: Video was being recorded
  3. Routes: A route had been selected and was active
  4. Swipes: One or more swipes were logged
  5. Incident: The driver pressed the incident button
  6. Students: A visualization of the student load count
6. To scroll through the timeline, click and hold on the vertical blue line, then drag it left or right as desired. 

  

    • Related Articles

    • Bus Power and Battery Guide

      Overview This document describes power usage of the Transportant system during its various operational modes along with options for monitoring and management. Power Draw of Transportant System The Transportant system connects to a vehicle's constant ...

    • Rename a Bus

      You can change a bus's name or number on the Buses page. See "edit buses" here for how to do that.

    • Bring a Bus Online

      Doing It To bring a bus online, turn the bus's ignition key to the accessories position. It is not necessary to start the engine. Wait until the lights on the attendant come on, which should only take a few seconds. At this point you may remove the ...

    • Bus Installation Guide

      This document is created to help guide appointed technicians in installing the Transportant system. Equipment The following is the list of tools, parts, and equipment needed for an initial installation. Transportant-Supplied Equipment (1) Attendant ...

    • Bus Lot Wi-Fi Credentials

      The Transportant system requires a wireless network in the bus parking lot. If the network names (SSIDs) or passwords of this network are changed, promptly communicate the new credentials to Transportant support at support@transportant.com so that ...