Buses

The Buses tile shows you a list of all the buses in your district. You can sort by name, number, status (whether the bus is moving, stopped, or offline), the last time the attendant on the bus connected to our system, the route currently being run, and which driver is on the bus now.

Live Video

If instead of video you see "Bus is parked at a location where video recording is turned off", see here to turn video on.

Edit Buses

Buses are normally added by Transportant while installing the hardware. This information can be edited.

1. Select the bus.
   
2. Click “Edit” next to “Vehicle info” underneath the video feed.
   
3. Edit the fields as needed.
   

If you wish to view or edit Wi-Fi information specifically, click on "Show WiFi information". Additional fields will open where you can enter or edit the Wi-Fi network name and password.

• Related Articles

• Overview

  On the Overview page, you can see your buses in real time moving down the highway, parked in the bus lot, or waiting outside the middle school to pick up students for their journey home. By default, the overview section displays a live report of all ...

• Wifi Report

  All information relating to bus lot Wi-Fi can be found in the Wifi Report. When you open the Wifi Report tile, you will see in the top right corner two view options: The option on the left takes you to a Wi-Fi signal strength report presented as a ...

• Groups

  Each group can view and interact with tiles on the dashboard that they have access to. You can adjust the level of access each group has. There is no limit to the number of groups you can create. You can make adjustments as many times as you wish to ...

• Points of Interest

  Points of Interest allow you to set up a custom geo-fenced area that will notify when your buses enter those areas. Click the magnifying glass in the upper left-hand corner. Type in the address and press enter. Click the blue plus (+) in the upper ...

• Allocations of Copilots and Cameras

  What is the allocations page The Allocations page, found in the Device Management section of the dashboard, is where you allocate copilots and cameras. It shows a list of any copilots or cameras that have been physically installed on a bus and ...