Feature | Options | Notes |
Bus visibility | Base case: Bus is visible within a set distance from the bus stop. This is normally one mile but is configurable. Option: The distance from the stop can be set to the point where the bus is visible during the entire route for the guardians and students on that route. | It is recommended that the visibility of the bus location be limited to a defined range from the bus stop. This protects the location of the bus outside the defined radius otherwise. The schools can configure this should they want greater or lesser visibility. |
Route visibility | Base Case: The bus route is not visible to guardians and students. See figure 1. Option: Schools can elect to show the entire bus route and bus stops on Bus Compass as an overlay. See figure 2. | Showing the route has
advantages and disadvantages.
It would allow students to go to a later stop if they
missed the bus. They can also
see the route a bus must go in
case it is physically close but
needs to go to other stops.
Visibility of all stops may be
considered a security risk, and a
school should understand this if
they elect to turn it on.
|