Points of Interest

Points of Interest

Points of Interest allow you to set up a custom geo-fenced area that will notify when your buses enter those areas. 
  1. Click the magnifying glass in the upper left-hand corner. 
  2. Type in the address and press enter.
  3. Click the blue plus (+) in the upper right-hand corner. A star will pop up in the middle of the screen.
  4. If necessary drag the pin to the exact location. 
  5. Name the location.
  6. Set the radius. It defaults to 100 meters, which is about 328 feet.
  7. If you don’t want to record at this point of interest (for instance, if a driver takes their bus home overnight) select "Don't record video at this location."

    • Related Articles

    • Live Video

      The Live Video tile is found in the Audio/Video section. Select which bus you would like to access by opening the drop-down menu in the upper left-hand corner. Any bus which is online will show up. If the bus you want is offline, you will need to ...

    • Overview

      On the Overview page, you can see your buses in real time moving down the highway, parked in the bus lot, or waiting outside the middle school to pick up students for their journey home. By default, the overview section displays a live report of all ...

    • Do Not Record

      Do Not Record (DNR) points, set and adjustable by your school district, are places where you believe video will not need to be recorded when the bus's engine is off. Not recording unneeded video is useful in that it lets the attendant retain wanted ...

    • Wifi Report

      All information relating to bus lot Wi-Fi can be found in the Wifi Report. When you open the Wifi Report page, you will see in the top right corner two view options: The option on the left takes you to a Wi-Fi signal strength report presented as a ...