Wiring Guide, v3 Attendant
Ethernet Ports: 12V, 1 Amp max, 0.5 Amp continuous
Cam 10 | Cam 8 | Cam 6 | Cam 4 | Cam 2 | Aux device |
1 | 3 | 5 | 7 | 9 | 11 |
2 | 4 | 6 | 8 | 10 | 12 |
Cam 9 | Cam7 | Cam5 | Cam3 | Cam1 | Copilot |
Darker shading indicates more available power. Copilots should be connected to port 11 or 12. On each port, orange LED indicates link and green indicates power.
CAN Bus
CAN-L | CAN-H |
Not used | Not used |
Power Molex 1722561003, 14ft or 4.5 meters
+12 | GND | Ignition |
16G | 16G | 18G |
Red | Black | Yellow |
Wire gauge is AWG or equivalent.
Analog Molex 17225610081, 4ft or 4.5 meters
Input 1 | Input 2 | Input 3 | Input 4 | Input 5 | Input 6 | Input 7 | N/C |
Stoparm (+) | All clear (-) | Door open (-) | Not used | Door open (+) | Battery monitor (connect to red wire during installation) | ||
18-20G | 18-20G | 18-20G | 18-20G | 18-20G | 18-20G | 18-20G | Not used |
Orange | Green | Light blue | Brown | Purple | Dark blue | Tan | Not used |
Audio Molex 1722581108, 19ft or 6 meters
Bus L- | Bus L+ | Bus R- | Bus R+ |
Speaker L- | Speaker L+ | Speaker R- | Speaker R+ |
18G | 18G | 18G | 18G |
white, red stripe | white, black & red stripes | gray, red stripe | gray, black & red stripes |
white | white, black stripe | gray | gray, black stripe |
All 4 bus side wires would have a red stripe in addition to the main color and/or black stripes.
Related Articles
Attendant Replacement Guide
Getting Started When Transportant staff recommends that you replace an attendant, this guide will help you through the process of removing your old one and installing a new one. You’ll need the following items: Masking tape and a marker, to label ...Bus Installation Guide
This document is created to help guide appointed technicians in installing the Transportant system. Equipment The following is the list of tools, parts, and equipment needed for an initial installation. Transportant-Supplied Equipment (1) Attendant ...Attendant Versions
It is often necessary for troubleshooting purposes to know which attendant version you have. The easiest way to know is to check the hostname, which should be printed on a sticker on the attendant: ATD3471 and below: v3 ATD3472-3500: v4 ATD3501-3999: ...Preventive Maintenance Guide
We suggest that you add the following weekly checks to your existing fleet preventive maintenance checklist. Attendant Inspect the attendant mounting points. Is the attendant secure to the bulkhead or is it loose? If it is loose, verify that the ...Back to School Guide
? Back to School with Transportant Best Practices for Starting the School Year ? Prefer a guided walkthrough? View the Back to School e-Learning Module Welcome to a new school year! This guide walks you through Transportant’s recommended steps to ...